Abstract
AbstractThis paper reports on a multiprobe scanning force microscope (SFM) utilizing an array of individually controlled piezoelectric Pb(Zr,Ti)O3 (PZT) microcantilevers. Each cantilever is unimorph beam including a sol-gel derived PZT thin film that has high piezoelectric constants in comparison with sputtered ZnO films. The cantilever is excited and actuated in z direction by applying ac and feedback dc voltages to the PZT layer. The variation of vibration amplitude is detected by measuring the change of current through the PZT layer. The 200-μm-long PZT microcantilever with the natural resonance frequency of 63.8 kHz has the high actuation sensitivity of 150 nmN and the maximum range of more than 1.5 μm. By actuating the self-excited cantilever to keep the current constant, we have succeeded in independent dynamic operation without z feedback actuation of the sample-side scanner. We have obtained independent parallel 2 × 1 images using two cantilevers of the array.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
