Abstract
The magnetic field surrounding an AC current-carrying wire is a promising source for energy harvesting. In this study, an AC magnetic field energy harvester is developed based on the piezoelectric vibration energy harvester. A permanent magnet placed near the AC current-carrying wire vibrates by coupling with the AC magnetic field. The kinetic energy of the vibration can be converted by the piezoelectric effect. Theoretical analysis indicates that the harvester composed of a piezoelectric cantilever with a permanent magnet at the free end should be placed so that the magnet and the wire do not collide. Then, the harvester was fabricated using a piezoelectric bimorph cantilever with a mechanical quality factor of 66 and a generalized electromechanical coupling factor (K2) of 3.1% and a neodymium magnet with a mass of 3.1 g. At an AC current of 5 Arms with a frequency of 50 Hz, an output of 1.3 mW was obtained.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.