Abstract
Ceramic materials based on lead titanate, lead niobate and bismuth layer-structured ferroelectrics (BLSF) were studied to develop piezoelectric ceramics for high temperature sensor applications. Compositional modification enabled lead titanate and lead niobate type ceramics to exhibit good piezoelectric properties at 500°C . The Curie temperature for one BLSF, CaBi4Ti4O15 was close to 800°C, though the piezoelectric constant was smaller than those of lead titanate and lead niobate ceramics. These ceramics seem to be good candidates for use as high temperature sensor materials. In addition, textured SrBi2Nb2O9 (SBN), another BLSF, ceramics with various orientation factors were fabricated through the templated grain growth (TGG) method. The resonant frequency of 76% textured SBN varied linearly with temperature and exhibited stable temperature characteristics. The temperature coefficient of the resonant frequency was –0.85 ppm/°C from –50 to 250°C, and was smaller than that of a quartz oscillator. Therefore, textured SBN ceramics are suitable for use as a resonator material when stable resonant frequency is needed in a high temperature range.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
