Abstract
Samarium and manganese doped lead titanate (PSmT) and lanthanum doped lead zirconate titanate (PLZT) fibres of 25–40 μm diameter have been prepared by the sol-gel methods. The sintered fibres were inserted into a plastic tube in a direction parallel to the tube axis. The tube was filled with epoxy and after the epoxy was cured, a 1-3 ceramic fibre/epoxy rod was formed. 1-3 composite disks were obtained by slicing the rod and they were then lapped to the required thickness and polarized. The properties of PSmT and PLZT 1-3 composites with various ceramic volume fractions were reported. High-frequency (20–50 MHz) composite transducers were fabricated and their pulse-echo response as well as frequency spectra were also measured and compared.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.