Physico-thermal and emission properties of tissue cultured clone from Bambusa balcoaa (Beema bamboo) and Oxytenanthera abyssinica as sustainable solid biofuels.

Abstract

In the search for alternatives to wood fuel, to meet the bio-energy requirement of an ever-increasing global population, the International Network for Bamboo and Rattan has supported farmers in many tropical countries to establish plantations of Beema bamboo (a tissue-cultured clone from Bambusa vulgaris) and Oxytenanthera abyssinica for bio-energy production. The quality of these species as solid biofuels is unknown due to the absence of data on their physico-thermal and emission characteristics. Using the American Standard for Testing and Materials and other internationally accepted standards, their ultimate and proximate analysis, and physico-thermal and emission properties were evaluated. Beema bamboo and O. abyssinica have high Hydrogen, organic and fixed Carbon contents and low quantities of ash, moisture content, volatile matter, Oxygen, Nitrogen and Sulphur. This will contribute to their heating values and low oxide emissions. Based on their High Heating Values (Beema bamboo = 23.22 MJ/kg; O. abyssinica = 23.26 MJ/kg), the species will be suitable for high energy-using applications. The Particulate Matter and Carbon Monoxide concentrations (Beema bamboo: 90 ug/m3 and 2.83 ppm respectively; O. abyssinica: 77.33 ug/m3 and 3.20 ppm respectively) are lower than the threshold (35000 ug/m3 and 9 ppm respectively) approved by the United States Environmental Protection Agency. These properties make the species good raw materials for solid biofuel which is safe for indoor use. Their use will contribute to reducing pressure on tropical forests for wood fuel and the health hazards associated with fossil fuel use.