Abstract
Thermal damage mechanisms are crucial in reservoir stimulation for enhanced geothermal system (EGS). This study investigates the thermal damage mechanisms in granite samples from the Gonghe Basin, Qinghai, China. The granite samples were heated to 400 °C and then cooled in air, water, or liquid nitrogen. The physical and mechanical properties of the thermally treated granite were evaluated, and microstructural changes were analyzed using a scanning electron microscope (SEM) and computed tomography (CT). The results indicate that cooling with water and liquid nitrogen significantly enhances permeability and brittleness while reducing P-wave velocity, strength, and Young's modulus. Specifically, liquid nitrogen cooling increased granite permeability by a factor of 5.24 compared to the untreated samples, while reducing compressive strength by 13.6%. After thermal treatment, the failure mode of the granite shifted from axial splitting to a combination of shear and tension. Microstructural analysis revealed that liquid nitrogen-cooled samples exhibited greater fracture complexity than those cooled with water or air. Additionally, acoustic emission (AE) monitoring during damage evolution showed that liquid nitrogen cooling led to higher cumulative AE energy and a lower maximum AE energy rate, with numerous AE signals detected during both stable and unstable crack growth. The results suggest that liquid nitrogen induces a stronger thermal shock, leading to more significant thermal damage and promoting the development of a complex fracture network during EGS reservoir stimulation. This enhances both the heat exchange area and the permeability of the deep hot dry rock (HDR) in EGS reservoirs. The insights from this study contribute to a deeper understanding of thermal damage characteristics induced by different cooling media and provide valuable guidance for optimizing deep geothermal energy extraction.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Similar Papers
More From: Journal of Rock Mechanics and Geotechnical Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.