Physicochemical and Pharmaceutical Properties of Carboxymethyl Rice Starches Modified from Native Starches with Different Amylose Content

Abstract

ABSTRACTCarboxymethyl rice starches (CMRS) were prepared from nine strains of native rice starches with amylose contents of 14.7–29.1%. The reaction was conducted at 50°C for 120 min using monochloroacetic acid as a reagent under alkaline conditions and 1‐propanol as a solvent. After determining the degree of substitution (DS), the physicochemical properties including water solubility, pH, and viscosity of 1% (w/v) solution, scanning electron microscopy (SEM), and X‐ray diffraction (XRD) analyses of the granules, as well as some pharmaceutical properties of CMRS powders and pastes were investigated. The DS range was 0.25–0.40. All CMRS dissolved in unheated water and formed viscous gel. A good positive correlation was observed between amylose content and DS (r = 0.9278) but not viscosity. SEM and XRD concurrently revealed significant physical alteration of CMRS granules compared with those of native starches, which reflected the changes in the properties of CMRS. At 3% (w/w), CMRS can function as tablet binder in the wet granulation of both water‐soluble and water‐insoluble diluents. The tablets compressed from these granules showed good hardness with fewer capping problems compared with those prepared using the pregelatinized native rice starch as a binder. In addition, most CMRS pastes formed clear films with varying film characteristics, depending upon the amylose content of the native starches. This type of modified rice starch can potentially be employed as a tablet binder and film‐former for pharmaceutical dosage formulations.