Abstract
The aim of this work is to improve the high performance of mud bricks. The latter was reinforced with rice straws as stabiliser leading to an improvement of the physico-mechanical properties. Thus, the physical characteristics of the clay such as natural water content, density, atterberg limit, plasticity limit (Wp) and plasticity index (Ip) were determined. Their values are respectively 8.39%, 2025.73 Kg/m3, 47.66%, 29.75% and 17.91%. The clay used is a low plastic organic silt. The normal proctocol provided an optimum dry density (ɣOP) of 1.28 Kg/m3 at an optimum moisture content of 12.42%. The actual density of the straw is 464 Kg/m3, its absorption rate reached 206% in 5 mins and stabilised at 385% at 480 mins of immersion. The maximum bending and compression strengths are respectively 1.52 and 0.164 MPa. The mud brick absorption coefficients obtained are between 4.875 at 0% straw and 20.573% at 3% straw.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Journal of Materials Science and Chemical Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.