Abstract
Bamboo has a very rapid growth rate and has been considered a promising non-wood biomass material that has the potential as a feedstock for charcoal production. This study was carried out to elucidate the physico-chemical and energy characteristic of bamboo charcoal produced from two (2) different species which were Aur Kuning Bamboo and Beting Bamboo. Each bamboo was carbonized at a temperature of 300 to 400oC for a duration of two hours. It was found that the density and volatile matter content of bamboo charcoal have decreased, while the ash content, fixed carbon (FC) content and calorific value (CV) have increased after being converted into charcoal. The results show that Aur Kuning Bamboo has good quality bamboo charcoal in comparison with Beting Bamboo in terms of its FC and CV content. Based on the average value, the FC (82.10%) and CV of Aur Kuning Bamboo (27.23%) were higher than FC (70.42%) and CV (26.05%) of Beting Bamboo with 16.59% (FC) and 4.53% (CV) different. Statistical analysis showed that there was a significant effect for different species of bamboo and a significant correlation between physical and energy properties. In conclusion, Aur Kuning Bamboo harvested from Sarawak wild forest has a higher potential to be a feedstock for charcoal production that will be useful for various applications in the near future.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Journal of Chemical Engineering and Industrial Biotechnology
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.