Physical properties of different nut butters

Abstract

AbstractThe objective of our work was to analyze the differences between four nut pastes, which were the following: walnut, peanut, pistachio, and tahini (sesame). The process technology of them is unknown, however, all the products contain 100% nut without any additives or flavoring.The paste samples were measured at 25 ± 0.2 °C. The apparent viscosity at a 10 1/s shear rate during flow curve recording, and the dynamic viscosity at a constant 20 1/s shear rate was determined by viscosity measurement with the use of the MCR302 modular compact rheometer. The L*a*b* color components were determined by ColorLite sph850 spectrometer, finally, the particle sizes and shapes of the samples were analyzed by the high-speed image analysis instrument QICPIC.The apparent viscosity and the average dynamic viscosity values of the four nut pastes were significantly different from each other. Differences were found between each paste according to the L*a*b* parameters. The complex structures of the particles are detailed and measurable, whereby the lengths and diameters of the particles can reliably be determined and fine deviations between the samples are detected. The sphericity decreases slightly with increasing particle size which means that bigger particles are more irregularly shaped.