Abstract
In this research, the fly ash (F/A) discharged from a thermal power plant was recycled to manufacture geopolymer containing granules instead of sand. Several types of granules using fly ash were assessed. The properties of the geopolymer/granule composites were analyzed as a function of the crystalline phase and size of the granules, as well as the molding pressure. The compressive strength and density of the geopolymer composites containing the hydrated granules fabricated by hand-tapping were 5.7 MPa and 1.47 g/cm3, respectively, while composites created by pressure molding were 15.6 MPa and 1.73 g/cm3. These results are comparative or superior to those of commercial cement bricks (8 MPa according to KS F 4004). Therefore, the geopolymer/granule composites fabricated in this study can be applied to cement bricks and can be a base for the enhancement of the recycling rate of fly ash.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
