Physical, morphological, mechanical and thermal properties of polyester composites reinforced with orientation of purun fiber (Eleocharis dulcis) composition

Abstract

Purun fiber (PF), which has been used as a raw material for handicrafts, can be used as a filler in composite materials. The purpose of this study is to determine the characteristics of polyester composites with the addition of PF filler at concentrations (5, 10, and 15 %) with arrangements, namely parallel, random, and woven. In this study, the method used was the press molding method with a size of 20 × 20 × 0.3 cm. The resulting composite was analyzed for functional groups, physical properties, morphological properties, mechanical properties, and thermal properties. The functional group results of PF treatment showed a sharp absorption at wave numbers 1724–2983 cm−1, indicating the presence of C=C vibrations in the aromatic ring. For all fiber arrangements, the addition of 10 % PF resulted in the best composite structure. The results of the highest composite physical properties include density, water absorption, and thickness swelling of 0.958 g/cm−3, 10.079 %, and 24.57 × 10−3, respectively. The results of the highest composite mechanical properties are tensile strength, tensile modulus, elongation, and flexural strength of 813.9519 MPa, 9345.737 MPa, 14.06 MPa, and 58.8399 MPa, respectively. While the results of the thermal properties that can be seen from the percent weight loss of the composite obtained the best results in random samples with a variation of 10 %, the effect of the PF filler ratio on composite heat flow obtained the best results, namely in samples parallel to 5 % with a temperature of 500.87 °C. It can be summarized that PF has the potential as a filler in the manufacture of composites.