Physical handsheet properties of pulp furnishes containing attritor-treated fibers

Abstract

Several articles have been published during the past 30 years on different methods to produce micro- to nanosize cellulose particles from pulp. Unfortunately, a general lack of information exists on the impact of differing manufacturing process methods upon the product properties obtained from these differing methods. Literature data show that wet processing of small-sized cellulosic fibers generates handsheets with approximately equal or higher density and modulus of elasticity than controls for a given amount of added microcellulose. The current work evaluated small particle generation from pulp fibers via dry processing methods and compared the physical properties of dry versus wet processed particles. Dry processing to obtain microcellulose gave considerably lower sheet density and modulus as compared with wet processed microcellulose. The lower modulus can be compensated for by refining base fibers more aggressively to obtain higher density and higher modulus sheets. Dry processing methods for making microcellulose and their impact on final board properties, including modulus and smoothness, will be discussed.