Abstract
The objective of this research was to evaluate the physical properties of different types of wax/oil systems. Olive (OO), corn (CO), soybean (SBO), sunflower (SFO), safflower (SAFO), and canola (CAO) oils were mixed with sunflower oil wax (SFOW), paraffin wax (PW), and beeswax (BW) at different concentrations (1% to 10%). Results from this study show that the physical properties of wax/oil systems is affected not only by the concentration and type of wax used, but also by the type of oil used. In general, wax/oil systems formulated with SFOW generated crystalline networks with high enthalpies (1 to 22 J/g) and high G' values (2 to 6 × 10(6) Pa) compared with the values obtained for BW and PW. SFOW crystalline networks were characterized by needle-like crystals independently of the wax concentrations and type of oil used. BW crystalline networks, however, were characterized by different crystal morphologies (needle-like or spherulites) depending on the wax concentration and type of oil used. PW samples were characterized by a crystalline network formed by needle- and platelet-like crystals. Enthalpy values of BW and PW samples were similar (0.3 to 20 J/g), but BW samples resulted in significantly higher (P < 0.05) G' values in the 5% and 10% samples with values of 3.9 × 10(6) and 6.1 × 10(5) Pa for 10% BW and PW, respectively.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.