Physical characterization and alkali carbonate reactivity (ACR) potential of the rocks from Bauhti Pind and Bajar area Hassan Abdal, Pakistan

Abstract

This study is conducted to evaluate aggregate characteristics and alkali carbonate reactivity (ACR) potential of carbonate rocks of the Bouhti Pind and Bajar area, Hassan Abdal, Pakistan. Physical and chemical tests were performed to assess aggregate suitability. Mean specific gravity (2.65–2.65), water absorption (0.51–0.68%), Los Angeles abrasion (24.78–26.10%) and sulphate soundness values (2.86–4.25%) of the carbonate rocks of these areas are within specified limits of their respective standards. Petrographic studies of Bajar area reveal the presence of 96.3% calcite, 2% clays, 1% hematite and 0.7% quartz. These rocks do not contain dolomite and show no expansion in rock cylinder test. Therefore, the aggregate is not prone to ACR and can be used in cement concrete. Rocks of Bouhti Pind area have mean 92% calcite, 3.8% dolomite, 2% clays, 1.2% hematite and 1% monocrystalline quartz. The amount of deleterious minerals specifically dolomite and clays are below the maximum allowed limit to initiate ACR. However, one of the rock cylinders shows 0.043% expansion which is below threshold limit of 0.10% to cause ACR as specified in ASTM C-585. Hence, these carbonate rocks qualify physical characterization and ACR tests and can be used in the construction of roads and in cement concrete.