Physical and performance characteristics of nonwoven aviation wipers composed of various staple fibers including raw cotton

Abstract

Several nonwoven materials were evaluated as candidates for wipe fabrics intended for sensitive applications, namely aviation maintenance. Wipes designed for this purpose must conform to specific guidelines delineated by the appropriate governing bodies. Fabric selections included both synthetic and natural staple fibers such as polyester, Lyocell and raw cotton varieties. A thorough evaluation of extractable material in an array of solvents revealed that cotton-based nonwovens as well as Lyocell have some of the lowest percentages of leachable solids. The resistance of these fabrics to abrasion and the damage incurred by them was also studied. Environmental scanning electron microscopy taken before and after the linting procedure showed that the greige cotton sample demonstrated some of the least damage. Fourier-transform infrared spectroscopy examinations of hexane extracts confirmed the absence of any silicone grease contamination on the wipes materials. Standardized tensile testing indicated that the cotton samples, especially mechanically cleaned greige cotton, have robust tensile properties that are important characteristics for wiping materials. These results indicate that cotton nonwovens, particularly greige cotton, are promising candidates for the development of future aviation and other wipes materials.