Abstract
Cobalt-chromium alloys are commonly used for surgical implants because of their high strength, superior corrosion resistance, non-magnetic behavior, and biocompatibility. Cobalt-Chromium-Molybdenum (Co-Cr-Mo) applications include prosthetic replacements of hips. This paper presents the attempt to produce metallic implant using Co-Cr-Mo powder by MIM process, focusing on the effects of different heating rate during sintering process at 1380°C. Co-Cr-Mo powder were mixed homogeneously with palm oil and conventional binders respectively with powder loading 65 vol% and was injection molded using vertical injection molding machine with the nozzle temperature of 160°C to produce green compacts. The binders then was removed by solvent extraction process and sintered in vacuum condition at atmosphere 10-5 mbar at temperature 1380 °C with varied heating rate; 0.5°C/min, 1.0°C/min and 3.0°C/min . Results indicated that sintered density and tensile strength varied from 8.100 gcm-3 to 8.200 gcm-3 and 546.971 MPa to 798.767 MPa respectively. The mechanical properties comply with the international standard (ASTM F75).
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.