Abstract
In the present work, dynamic stress-strain response of Himalayan dolomite is tested under high loading rates using 38 mm split Hopkinson pressure bar (SHPB) device. The physical and static mechanical properties of dolomite e.g. density, specific gravity, static compressive strength and elastic modulus values are also determined. Petrological studies of dolomite are carried out through X-ray diffraction (XRD) test and scanning electron microscope (SEM) test. In the SHPB tests, it is observed from the stress-strain response that the dynamic peak stress increases with increasing strain rate whereas the elastic modulus does not show any clear trend with an increase in strain rate. Dynamic force equilibrium at the incident and transmission bar ends of the rock samples is attained in all tests till the failure of the rock samples. Dynamic increase factor (DIF) for the rock is determined at a particular strain rate by comparing the dynamic to static peak compressive stress.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.