Abstract
All-oxide solar cells are presently attracting extensive research interest due to their excellent stability, low-cost and non-toxicity. However, the band gap of metal oxides is lack of effective optimization and results in poor photovoltaic performance, thus hindering their practical applications. In this work, Co3O4 was investigated for application as a photo-absorber in all-oxide solar cells, and its band gap was optimized by introducing Li dopant into the spinel structure. LixCo3−xO4 nanoparticles, prepared via the hydrothermal method, were homogenously coated onto TiO2 mesoporous films, which were then used to fabricate planar heterojunction TiO2/LixCo3−xO4 solar cells (SCs). The effects of Li-doping on the heterojunction solar cell performance were further investigated. The findings revealed that the incorporation of Li ions into Co3O4 led to a significant enhancement in short-circuit current density (Jsc). Remarkably, a high open-circuit voltage (Voc) of 0.70V was also achieved. Besides, reasons for the enhanced cell performance are the narrower band gap, reduced photogenerated carrier recombination and the more favorable energy band structure as compared with SCs assembled from pure Co3O4.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.