Abstract
In this work, the quantum dot CuInS2 layer was deposited on TiO2 film using successive ionic layer absorption and reaction (SILAR) method, and then two bithiazole-bridged dyes (BTF and BTB) were sensitized on the CuInS2/TiO2 films to form dye/CuInS2/TiO2 photoanodes for DSSCs. It was found that the quantum dots CuInS2 as an energy barrier layer not only could effectively improve open-circuit voltage (Voc) of solar cell, but also increase short-circuit photocurrent (Jsc) compared to the large decrease in Jsc of ZnO as energy barrier layer. The electrochemical impedance spectroscopy (EIS) measurement showed that the CuInS2 formed a barrier layer to suppress the recombination from injection electron to the electrolyte and improve open-circuit voltage. Finally, the open-circuit voltage increased about 22 and 27mV for BTF and BTB-/CuInS2/TiO2-based cells, the overall conversion efficiencies also reached to 7.20% and 6.74%, respectively.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
