Abstract
A broadband photodetector with high performance is highly desirable for the optoelectric and sensing application. Herein, we report a "photo-thermo-electric" (PTE) detector based on an ultrathin SnTe film. The (001)-oriented SnTe films with the wafer size scale are epitaxially grown on the surface of sodium chloride crystals by a scalable sputtering method. Due to the giant PTE effect under laser spot excitation on the asymmetric position between two terminals, a built-in electrical field is produced to drive bulk carriers for a self-powered photodetector, leading to a broad spectral response in the wavelength range from 404 nm to 10.6 μm far beyond the limitation of the energy band gap. Significantly, the photodetector displays a high on/off photoswitching ratio of over 105 with a suppressed dark current, which is 4-5 orders of magnitude higher than that of other reported SnTe-based detectors. Under zero external bias, the device yields the highest detectivity of ∼1.3 × 1010 cm Hz1/2 W-1 with a corresponding responsivity of ∼3.9 mA W-1 and short rising/falling times of ∼78/84 ms. Furthermore, the photodetector transferred onto the flexible template exhibits excellent mechanical flexibility over 300 bending cycles. These findings offer feasible strategies toward designing and developing low-power-consumption wearable optoelectronics with competitive performance.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.