Abstract
In 2 O 3 nanoparticles were synthesized at low substrate temperatures by the metal organic chemical vapor deposition technique. Nanoparticles with a mean diameter from 3 to 33 nm can be obtained by varying the growth temperature. Photoreduction and oxidation studies were carried out for particle-containing layers exhibiting a resistance change of more than five orders of magnitude after ultraviolet irradiation and oxidation by ozone. A grain boundary model was proposed to understand the photoreduction and oxidation mechanism for the nanoparticle layers. It was suggested that by photoreduction the nanoparticles are reactivated throughout the layer. The Schottky barrier between the nanoparticles decreases inducing a reduction of the space-charge-limited region. After oxidation, a completely depleted space-charge region covering the whole volume of In2O3 nanoparticles is formed. Furthermore, the bulk diffusion process dominates the response of thick layers during the oxidation process. By decreasing the layer thickness down to 10 nm, surface effects dominate, resulting in an ultrafast response to changes in ozone concentration. The typical response time of very thin In2O3 nanoparticle layers was determined to be less than 1 s.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.