Abstract
In this research, benzotriazole (BTA) was removed from aqueous solution using photoperoxi-coagulation (PPC) in which activated carbon fiber (ACF) was used as a cathode. Box-Behnken design was used to optimize and analyze four parameters i.e. time, applied current, initial BTA concentration and UV light power. According to the results, the R-squared and adjusted R-squared were 0.982 and 0.964, respectively, implying that the model was statistically suitable. It was shown that under the optimal condition for BTA removal i.e. 60 mg/L initial BTA concentration, 50 min time, 200 mA applied current and UV light power of 12W, the efficiency of the PPC process was maximum (97.8%). The removal mechanisms were determined and their results showed that the oxidation mechanism of photoperoxi-coagulation process had a more contribution in BTA removal in comparison with coagulation mechanism. The results of scavenging experiments also confirmed the determined removal mechanisms. Synergistic effect was observed in PPC while first order rate constant of PPC was 2.7 fold more than that of sum of each mechanism. The removals of TOC and COD were 64.5% and 76.3% respectively. Average oxidation state and carbon oxidation state of BTA solution were increased after PPC process indicating biodegradability improvement indirectly.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Journal of Photochemistry and Photobiology A: Chemistry
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
