Photooxidation of aqueous trichloroethylene using a buoyant photocatalyst with reaction progress monitored via micro-headspace GC/MS

Abstract

Although photooxidation has previously been shown to be successful in removing organic contaminants from water, methods combining the rapid photooxidation of the desired contaminant with easy catalyst manipulation and removal are few and far between. In the absence of an easy means of catalyst removal, the photooxidation process becomes more costly and time consuming, and photocatalysis cannot be employed as an in situ method for the remediation of aqueous organic contaminants. In this study, the photocatalyst was added to an aqueous trichloroethylene (TCE) solution in the form of TiO 2-coated buoyant microspheres. The solution, placed in a flow-cell photoreactor along with the buoyant catalyst, was irradiated with a UV-filtered Xenon light source. Limited sample sizes necessitated the development of a low-cost headspace GC/MS analysis method, utilizing a standard direct-injection autosampler. This analytical technique aptly monitored reaction progress and indicated that aqueous TCE concentration decreases by nearly 90% in the first hour of irradiation. Subsequent solvent extraction GC/MS analysis indicated that the TCE is initially sorbed by the photocatalyst spheres, but as irradiation continued, TCE is removed from the catalyst spheres surfaces. During the course of irradiation, the expected TCE mineralization product hydrochloric acid appeared, as indicated by a decrease in pH and ion chromatography analysis. The microsphere-born catalyst was easily removed from the treated solution by filtration. Thus, it is possible that a method for effective, low-cost in situ photooxidation of aqueous organic contaminants will be realized in the near future.