Abstract
We propose a novel photonic downconversion method based on optical carrier reusing. In the proposed system, the phase modulator (PM) is placed between two narrowband fiber Bragg gratings (FBGs), which are designed to reflect the optical carrier and transmit the optical sidebands. The optical carrier is modulated in the PM in two directions and is not injected into the photodetector (PD). Thus, the utilization ratio of the optical carrier is enhanced and the power saturation in the PD is avoided. Consequently, the system gain can be improved. In addition, a 2×2 optical coupler is cooperated with a balanced PD behind these two FBGs. Resulting from the subtle design of the phase difference, gain is furthermore doubled and intensity noise can be reduced simultaneously. In the experiments, 29 dB gain improvement is measured compared with the traditional dual-series intensity modulators method. The noise floor is reduced by 12.1 dB.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.