Abstract
This study investigated the in vitro degradation of both solid PPF networks and porous PPF scaffolds formed by photoinitiated cross-linking of PPF polymer chains. Three formulations of scaffolds of differing porosity and pore size were constructed by varying porogen size and content. The effects of pore size and pore volume on scaffold mass, geometry, porosity, mechanical properties, and water absorption were then examined. Throughout the study, the solid networks and porous scaffolds exhibited continual mass loss and slight change in length. Porogen content appeared to have the greatest effect upon physical degradation. For example, scaffolds initially fabricated with 80 wt % porogen content lost approximately 30% of their initial PPF content after 32 weeks of degradation, whereas scaffolds fabricated with 70 wt % porogen content lost approximately 18% after 32 weeks of degradation. For all scaffold formulations, water absorption capacity, porosity, and compressive modulus were maintained at constant values following porogen leaching. These results indicate the potential of photo-cross-linked PPF scaffolds in tissue engineering applications which require maintenance of scaffold structure, strength, and porosity during the initial stages of degradation.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.