Photoinduced darkening, crystallization and reversible emission in ZnTe thin films

Abstract

Laser-induced darkening and crystallization of ZnTe-based thin films is reported. ZnTe thin films of 1500-nm thickness were deposited on bare and Zn buffer layered borosilicate glass substrates. The as-deposited films were subjected to laser irradiation at 532 nm. The as-deposited films were amorphous but transformed to the crystalline state under influence of the laser treatment. The X-ray diffraction patterns revealed that the ZnTe crystallized in the zinc blende structure. In addition, presence of peaks from Te was observed, signifying the dissociation of ZnTe. The spectral transmission of the films decreased by more than 15 % under the influence of the laser irradiation and this was accompanied by a red shift in the band gap. These results clearly point to the occurrence of laser-induced darkening and crystallization of the films. To understand the mechanisms of darkening and crystallization, all the films were annealed at 500 °C for 60 min. Similar to the laser-irradiated samples, the thermally annealed films showed an amorphous–crystalline transition, presence of Te in the X-ray diffraction patterns as well as a large decrease in spectral transmission (>70 %). Photoinduced emission analysis carried out as a function of laser intensities indicated a strong red shift of about 51 meV in emission energy with increase in laser intensity due to the photodarkening. The peak position of the emission spectrum can be tuned by increasing the laser intensity and is completely reversible with decrease in laser intensity. It is proposed that laser-induced darkening occurs due to the dissociation of ZnTe into ZnTe and Te and that crystallization is a consequence of laser annealing.