Photocurable Foam for Three-Dimensional-Printed Porous Structures.

Abstract

In this research, a foam three-dimensional (3D) printing method using digital light processing (DLP) technology was developed to fabricate 3D-printed porous structures. To address the challenges in preparing DLP precursor foam fluid, we designed a specialized foaming device. This device enables the precursor solution to be blended with air, resulting in a stable foam precursor with an adjustable air/liquid fraction and suitable fluidity, crucially enhancing the gas-liquid contact time for the printing process. By manipulation of fluid flow rates, cycle counts, and gas/liquid ratios, one can easily prepare uniform foams with precise control over the pore size and porosity. To avoid significant volume reduction during ultraviolet (UV) curing, nanoparticle fillers were introduced into the network to prevent collapse of the foam structure. Furthermore, the inclusion of an UV absorber enhanced the quality of the printing process by addressing the limitations associated with particle scattering and reflection. The DLP process can readily fabricate intricate structures, featuring a planar resolution below 30 μm and a printing accuracy of less than 1%. Several examples were also demonstrated to highlight the advantages of this technology and its ability to directly print custom foam structures, thereby saving time and material resources.