Abstract

AbstractThe photocrosslinking of polyacrylonitrile‐block‐polybutadiene‐block‐polyacrylonitrile (ABA) was shown to proceed within seconds at ambient temperature upon UV exposure in the presence of an acylphosphine oxide photoinitiator. The curing process was followed by infrared spectroscopy, insolubilization, and hardness measurements. Complete insolubilization could not be achieved with the neat ABA rubber because of the poor reactivity of the 2‐butene double bond and the low vinyl content of the polybutadiene chain. The addition of multifunctional acrylate monomers (20 wt %) causes a substantial increase of both the reaction rate and the crosslink density of the polymer, which becomes completely insoluble in toluene in less than 1 s upon UV irradiation. An even greater effect was observed by using small amounts (1 wt %) of a trifunctional thiol crosslinker. Both the thiol and the photoinitiator concentrations were shown to affect the kinetics of the thiol–ene polymerization and the polymer network crosslink density. A direct relationship was found to exist between the swelling degree of the UV‐cured rubber and the interchain molecular weight of the network. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 2204–2216, 2001

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call