Photochemistry in the Low-Temperature Processing of Metal Oxide Thin Films by Solution Methods.

Abstract

Photochemistry has emerged in the last few years as a powerful tool for the low‐temperature processing of metal oxide thin films prepared by solution methods. Today, its implementation into the fabrication procedure makes possible the integration of amorphous semiconductors or functional crystalline oxides into flexible electronic systems at temperatures below 350 °C. In this review, the effects of UV irradiation at the different stages of the chemical solution deposition of metal oxide thin films are presented. These stages include from the synthesis of the precursor solution to the formation of the amorphous metal‐oxygen network in the film and its subsequent crystallization into the oxide phase. Photochemical reactions that can be induced in both the solution deposited layer and the irradiation atmosphere are first described, highlighting the role of the potential reactive chemical species formed in the system under irradiation, such as free radicals or oxidizing compounds. Then, the photochemical effects of continuous UV light on the film are shown, focusing on the decomposition of the metal precursors, the condensation and densification of the metal‐oxygen network, and the nucleation and growth of the crystalline oxide. All these processes are demonstrated to advance the formation and crystallization of the metal oxide thin film to an earlier stage, which is ultimately translated into a lower temperature range of fabrication. The reduced energy consumption of the process upon decreasing the processing temperature, and the prospect of using light instead of heat in the synthesis of inorganic materials, make photochemistry as a promising technique for a sustainable future ever more needed in our life.