Abstract
Recent work is focused on photocatalytic reduction of aqueous perchlorate (ClO4-) by using Cu–TiO2/SiO2 catalysts in the presence of a hole scavenger (citric acid, Cit) in UV/Cu–TiO2/SiO2 system. The catalysts were prepared by the sol–gel dip-coating method using SiO2 as a support, tetrabutyl titanate and copper chloride as precursors. The catalysts were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), diffuse reflectance UV–Visible (DRS-UV–Vis) and X-ray photoelectron spectroscopy (XPS). The influences of copper content in catalysts, photogenerated electron, photogenerated hole, hydroxyl radical, initial pH and intermediates on photocatalytic perchlorate reduction were studied and the optimum reaction conditions were determined. Results indicate that the catalyst has the best catalytic activity when the nominal mass ratio of Cu2+ to TiO2 is 0.5%. The efficiency of perchlorate reduction in the presence of Cit (0.15mM) can reach 56.0% after 140min irradiation (368±0.5K) when the initial concentration of ClO4- was 0.001mM. Cl− is identified as the end product and ClO4- concentration increases after Cit is exhausted. ClO3- is the main intermediate either in the course of ClO4-→Cl- in the presence of Cit or of Cl-→ClO4- in the absence of Cit in UV/Cu–TiO2/SiO2 system.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.