Photocatalytic, phosphorus‐doped, anatase oxide layers applicable to titanium implant alloys

Abstract

Titanium alloys provide excellent corrosion resistance and favorable mechanical properties well suited for a variety of biomaterial applications. The native oxide surface on titanium alloys has been shown to be less than ideal and surface modification is often needed. Previously, an optimized anodization process was shown to form a porous phosphorus‐enhanced anatase oxide layer on commercially pure Ti grade 4. The anodized layer was shown to improve osseointegration and to reduce bacteria attachment when photocatalytically activated with UVA preillumination. The primary objective of the present study was to create a similar phosphorus‐enhanced anatase oxide layer on series of titanium alloys including commercially pure Ti grade 4, Ti‐6Al‐7Nb, Ti‐6Al‐4V ELI, alpha + beta Ti‐15Mo, beta Ti‐15Mo, and Ti‐35Nb‐7Zr‐5Ta. Phosphorus‐enhanced anatase oxide layers were formed on each titanium substrate. Anatase formation was shown to generally increase with oxide thickness, except on substrate alloys containing niobium. Phosphorus uptake was shown to be dependent on the titanium alloy chemistry or microstructure. Anodized layers formed on beta‐structured titanium alloys revealed the lowest phosphorus uptake and the most nanosized surface porosity. A methylene blue degradation assay showed anodized layers on commercially pure Ti and both Ti‐15Mo alloys to exhibit the highest levels of photocatalytic activity. Given the range of mechanical properties available with the commercially pure Ti and Ti‐15Mo alloys, the results of this study indicate the benefits of phosphorus‐enhanced anatase oxide coatings may be applicable to a wide variety of biomaterial applications.