Abstract
The photocatalytic degradation of toluene in air was carried out on particles ofTiO2in a photocatalytic reactor that had been developed to study the treatment of organic pollutants in a gaseous phase. Hypothetically, the fluidized bed technology of this reactor could make it possible to increase the mass transfer coefficients in comparison with those of conventional photoreactors. The photocatalytic particles used were prepared by mixingTiO2(Degussa P25) and starch in a methanol solution. The XRD and SEM results of these aggregates confirm the titanium dioxide (Degussa P25) characteristics, such as the presence of anatase on the particle surface and spongy and wrinkled morphology. Toluene concentrations varied from 0.9 to 199ppmv, and all the experiments were carried out with a flow rate of 300 NL/h. Toluene conversions from 77%to 100%were obtained in the range studied. In this work, the regeneration processes of deactivatedTiO2photocatalysts have been investigated using FT-IR and GC/MS techniques. Benzoic acid, benzaldehyde, and benzyl alcohol were the three major intermediate products identified.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.