Abstract
To produce tin oxide (SnO2 ) nanoparticles (NP) with microalga for use in azo dye-polluted wastewater treatment and to optimize the conditions to synthesize as small NPs as possible. The green microalga Chlorella vulgaris mediated NPs were synthesized after an optimization process utilizing the statistical response surface methodology (RSM). The optimized synthesis conditions were 200 W microwave power, 0.5 mM SnCl2 concentration and 200°C calcination temperature. Methyl orange (MO) was studied for its photocatalytic degradation with UV. Antibacterial activity against four pathogenic bacteria was studied using the well diffusion method. Cytotoxicity was measured using the MMT assay with lung cancer cell line A549, and antioxidant activity using DPPH radical scavenging. Following the optimization of their production, the produced crystalline SnO2 NPs were on average 32.2nm (by XRD) with a hydrodynamic size of 52.5nm (by LDS). Photocatalytic degradation of MO under UV was nearly complete (94% removal) after 90 min and the particles could be reused for 5cycles retaining 80% activity. The particles had antibacterial activity towards all five tested bacterial pathogens with the minimum inhibitory concentrations ranging from 22 to 36 μg/ml. The minimum bactericidal NP concentration varied between 83 and 136 μg/ml. Antioxidant activity was concentration dependent. A cytotoxicity was determined towards A549 cells with an LD50 of 188 μg/ml after 24 h of incubation, a concentration that is much higher than the active concentration for dye removal ranging from 22 to 36 μg/ml. After optimization, SnO2 nanoparticles produced with C. vulgaris displayed high photocatalytic activity at concentrations below their antibacterial and cytotoxic activities. The SnO2 nanoparticles produced with the help of microalgae are suitable for the removal of MO dye from wastewater. Further applications of this green technology can be expected.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.