Abstract
The addition of nanoparticles (NPs) into a polymer matrix represents a simple yet efficient tool for introducing or enhancing functional properties. 3D printing is a processing technique with unprecedented control over the micro- and macroscopic structure. Their combination creates a versatile fabrication tool for both professional and hobby users. However, some less intuitive effects brought about by NPs must also be considered. This study has thoroughly investigated the addition of bare and alumina-doped zinc oxide NPs into a representative free-radical photo-polymerization resin. The alumina doping suppressed the characteristic surface plasmon resonance of ZnO NPs. This absorption band was found crucial for the NP photoactivity and, subsequently, the conversion kinetics, post-curing, thermomechanical, and electric/dielectric properties of the nano-filled resins. Furthermore, three experimental techniques for assessing the photocuring kinetics – real-time FTIR, photo-DSC, and Jacobs working curves, were compared and resolved. Each yielded a completely different conclusion due to the photothermal effect and nanoreinforcement. The presented data shall aid with designing and testing of functional photopolymer nanocomposites for 3D printing and other low-intensity curing applications.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
