Phosphorus removal from aqueous solutions by sorption on two volcanic soils

Abstract

The use of low-cost materials for P removal is of interest for developing cost-effective techniques for preventing P pollution. This paper reports a study on phosphate removal from aqueous solutions by sorption on two volcanic soils. The raw and HCl-treated soils were characterized with respect to oxalate-extractable and dithionite-extractable Al and Fe contents, surface area, and P sorption capacities. The phosphate sorption isotherms, kinetics, pH effects, and desorbability were evaluated in batch tests. The measured isotherm data were well fitted by the Freundlich and Temkin models. Phosphate sorption on these soils was relatively fast and the kinetics could be satisfactorily described by the simple Elovich and power function equations. The two soils had maximum phosphate sorption capacities of approximately 0.85 and 1.35 mg g-1 gram of soil at pH 6.0–6.5. The pH had different effects on phosphate sorption on these soils, likely due to either calcium phosphate precipitation or surface repulsion of the negatively charged phosphate species at a higher pH. Column flow-through tests using both synthetic phosphate solution and liquid swine manure confirmed the phosphate removal ability of the volcanic soils. It was concluded that volcanic soils could be potential low-cost materials for controlling P pollution from agricultural sources. Key words: Phosphate removal, volcanic soil, sorption, isotherm, kinetics, desorption