Abstract
A novel biochar composite was fabricated via the pyrolysis of distillers grains treated phosphogypsum for phosphate removal from water. Batch adsorption experiments were performed on the adsorption characteristics of phosphate. Effects of pyrolysis temperature, solution pH, the dosage of adsorbent, ambient temperature on phosphate adsorption were also investigated. The results demonstrated that the optimum initial solution pH for phosphate adsorption was 6.0, and high pyrolysis temperature was favorable for phosphate adsorption. The optimal dosage of biochar was 1.25 g L−1. A pseudo-second-order kinetic model can well explain the adsorption kinetics, indicative of the energetically heterogeneous solid surface of the composite. The maximum phosphate adsorption capacity of the phosphogypsum modified biochar obtained from Langmuir isotherm reached 102.4 mg g−1 which was almost five times that of distillers grains biochar alone (21.5 mg g−1). The mechanism is mainly attributed to electrostatic adsorption, surface precipitation and ligand exchange. The ideal adsorption performance indicated that biochar supported phosphogypsum can be used as high-quality adsorbent for phosphate removal in wastewater treatment.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
