Phenomenological studies on structure and elemental composition of nanosecond and femtosecond laser-generated aerosols with implications on laser ablation inductively coupled plasma mass spectrometry

Abstract

In laser ablation inductively coupled plasma mass spectrometry (LA-ICPMS), the properties of laser-generated aerosols, such as size and composition, are crucial for matrix-independent quantification. In this study, the aerosol particle morphology and elemental composition generated by two state-of-the-art laser systems (ArF excimer nanosecond-UV laser and Ti:sapphire femtosecond-IR laser) were investigated by electron microscopic techniques. Electrostatic sampling of the aerosols directly onto transmission electron microscopy (TEM) grids allowed us to study the morphology and elemental composition of the aerosols using TEM and TEM–EDX (energy dispersive X-ray spectroscopy) analyses, respectively. The results of the electron microscopic studies were finally compared to the LA-ICPMS signals of the main matrix components. The investigations were carried out for non-conducting materials (glass and zircon), metallic samples (steel and brass) and semiconductors (sulfides). The studies confirm that ns-LA-generated aerosols dominantly consist of nanoparticle agglomerates while conducting samples additionally contain larger spherical particles (diameter typically 50 to 500 nm). In contrast to ns-laser ablation, fs-LA-generated aerosols consist of a mixture of spherical particles and nanoparticle agglomerates for all investigated samples. Surprisingly, the differences in elemental composition between nanoparticle agglomerates and spherical particles produced with fs-LA were much more pronounced than in the case of ns-LA, especially for zircon (Si/Zr fractionation) and brass (Cu/Zn fractionation). These observations indicate different ablation and particle formation mechanisms for ns- and fs-LA. The particle growth mechanism for ns-LA is most likely a gas-to-particle conversion followed by agglomeration and additional hydrodynamic sputtering for conducting samples. On the other hand, phase explosion is assumed to be responsible for the mixture of large spherical particles and nanoparticle agglomerates as found for fs-LA-generated aerosols. Based on these mechanisms, the overall temporal elemental fractionation effects in ns-LA-ICPMS seem to occur mainly during the ablation. This effect was not observed for fs-LA-ICPMS despite the element separation into different particle fractions, which, on the other hand, could induce severe ICP-induced fractionation.