Abstract
Zirconia-based shape memory ceramics (SMCs) exhibit anisotropic mechanical response when undergoing elastic deformations as well as during austenite-martensite phase transformation. This behavior results in different types of strain incompatibility at grain boundaries, which we study here using a micromechanical model. A single-crystal model is developed to provide a full mechanistic three-dimensional description of the anisotropic elastic as well as martensitic transformation stress-strain response, including non-Schmid behavior caused by the significant volume change during martensitic transformation. This model was calibrated to and validated against compression tests of single-crystal zirconia micro-pillars, prior to being used to model bi-crystals. Upon the introduction of a grain boundary, the simulation provides detailed information on the nucleation and evolution of martensite variants and stress distribution at grain boundaries. We identify bicrystal configurations which result in very large stress concentrations at very low deformations due to elastic incompatibility, as well as others where the elastic incompatibility is relatively low and stress concentrations only occur at large transformation strains. We also show how this approach can be used to explore the misorientation space for quantifying the level of elastic and transformation incompatibility at SMCs grain boundaries.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have