Abstract
Prediction of microstructure evolution and microsegregation is one of the most important problems in materials science. The dendritic growth and microsegregation provide a challenging simulation goal for computational models of solidification, in addition to being an important technological feature of many casting processes. The phase-field model offers the prospect of being able to perform realistic simulation experiments on dendrite growth in metallic systems. In this paper, the microsegregation and dendritic growth of hypoeutectic Al-Cu alloys under constant cooling rate was simulated using a phase-field model. The main new feature of the present model is based on the fact that the effect of the growth rate is incorporated via an effective partition coefficient that has been experimentally determined for a range of growth rates. It is shown that both models (Phase-field model and Scheil) have significant deviations from the experimental data when the equilibrium partition coefficient is considered in the calculations. Since the predicted results using the models yielded discrepancies from the experimental data, an experimental equation is adopted for calculating the effective partition coefficient from experimental data. The experimental equation is then adopted in the calculations of phase-field model and Scheil's equation, showing a good agreement with the experimental data.
Highlights
Solidification processing is one of the important routes to produce metallic materials, especially alloys
The system temperature is uniform and continuously decreased with a constant cooling rate from the initial temperature (T0), which is slightly lower than the liquidus temperature of the Al–Cu alloy
Where T0 is the initial temperature, Ṫ represents a constant value for the cooling rate and t is the solidification time
Summary
Solidification processing is one of the important routes to produce metallic materials, especially alloys. In contrast to the previous phase-field models, in the present paper the numerical results are achieved in the simulations by disregarding the equilibrium partition coefficient (Ke) and, instead, imposing an effective partition coefficient (Kef). The aluminium alloys (Al-CU) have been chosen taking into account their high strength, which is achieved by the heat treatment process, the cast aluminium alloys yield cost-effective products due to the low melting point In this present paper, the phase-field model is applied in solidification of two binary alloys Al-2.64×10−2mol%Cu (6.0wt.%Cu) and Al-4.5×10−2mol%Cu (8.9wt.%Cu). Experimental microsegregation profiles from the central part of the dendrite cores to the limit of the interdendritic regions were determined by Meza et al.[15] in the different growth rates In this present paper, it is assumed that said alloys are diluted; the copper is completely soluble in the aluminium. The microsegregation profiles predicted by both the phase-field model and Scheil’s equation, using the new partition coefficient, are compared with experimental data
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
