Abstract
Garnet based Dy3Fe5O12 nanostructured materials have gained considerable attention in recent years due to their potential technological applications. Garnet type structured Dy3Fe5+xO12−x nanocrystalline powders were synthesized via propellant chemistry route. Single and mixed-fuel approaches were employed in the solution combustion process. Annealing the combusted powders at 1000 °C for 6 h resulted in nanocrystalline powders which are about 95% by weight garnet type and 5% orthorhombic DyFeO3. This was confirmed from powder X-ray diffraction studies through Rietveld analysis. The solution combustion mechanisms involved in the formation of Dy3Fe5+xO12−x nanocrystalline powders are briefly discussed. Scanning electron microscopy and energy dispersive X-ray spectroscopy studies revealed that the choice of fuel approach in the synthesis process affected the morphology and elemental composition. Raman spectroscopic studies revealed the existence of two magnon and two phonon scattering peaks rarely observed for garnet based Dy3Fe5O12. The synthesized Dy3Fe5+xO12−x nanocrystalline powders displayed ferromagnetic behavior. The saturation and remanent magnetization varied between 2.67-8.29 and 1.08–2.64 emu/g respectively, while the corecivities were in the order of few hundreds oersteds, characteristic of a soft ferromagnetic material. It is suggested that Dy3Fe5+xO12−x nanocrystalline powders with different magnetic properties could be tailored for different requirements.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.