Phase equilibria study of { N-butylquinolinium bis{(trifluoromethyl)sulfonyl}imide + aromatic hydrocarbons, or an alcohol} binary systems

Abstract

Quinolinium ionic liquid has been prepared from 1-butylquinolinium bromide as a substrate. The work includes specific basic characterization of synthesized compound by NMR spectra, elementary analysis and water content. The basic thermal properties of the pure IL, i.e. melting and glass-transition temperatures, as well as the enthalpy of fusion have been measured using a differential scanning microcalorimetry technique (DSC). (Solid + liquid) phase equilibria (SLE) and (liquid + liquid) phase equilibria (LLE) for the binary systems: ionic liquid (IL) N-butylquinolinium bis{(trifluoromethyl)sulfonyl}imide, {([BQuin][NTf 2]) + aromatic hydrocarbon (benzene, or toluene, or methylbenzene, or propylbenzene, or thiophene), or an alcohol (ethanol, or 1-butanol, or 1-hexanol, or 1-octanol, or 1-dodecanol)} have been determined at ambient pressure. A dynamic method was used over a broad range of mole fractions and temperatures from (260 to 330) K. For the binary systems, the simple eutectic diagrams were observed with immiscibility in the liquid phase with an upper critical solution temperature (UCST). For mixtures with alcohols, it was observed that with increasing chain length of an alcohol the solubility decreases and the UCST increases. In the case of mixture (IL + benzene, or alkylbenzene, or thiophene) the eutectic systems with mutual immiscibility in the liquid phase with very high UCSTs were observed. These points were not detectable with our method and they were observed at low ionic liquid mole fraction. Densities at high temperatures were determined and extrapolated to T = 298.15 K. Well-known UNIQUAC, and NRTL equations have been used to correlate experimental SLE data sets. For the systems containing immiscibility gaps {IL + an alcohol} parameters of the LLE correlation equation have been derived using only the NRTL equation.