Abstract
This paper presents the results of our comprehensive study of phase equilibria in the Al–Fe–Mo system using DTA, X-ray diffraction, SEM and electron probe microanalysis. The liquidus and solidus projections were constructed. It is shown that the ternary compound Al8FeMo3 (τ) melts congruently at >1500 °C and has a homogeneity range from 2 to 9 at.% Fe and from 23.5 to 25 at.% Mo. Isostructural phases (Mo), (αFe) and AlMo (W-type structure, cI2-Im-3m) at solidus temperatures form a continuous solid solution (αFe,Mo,AlMo). Unlike the AlMo binary phase, which is not retained by quenching, the ternary (αFe,Mo,AlMo) phase is easily quenched due to its lower decomposition temperature. Among the binary based phases, the Al8Fe5 (ε) phase has the widest homogeneity region, which extends up to 24 at.% Mo at solidus temperatures. It is shown that the addition of Mo stabilizes the Al8Fe5 (ε) phase, and the temperature of its formation in the ternary system increases to 1331 °C in contrast to 1234 °C in the binary. Moreover, according to XRD data, the Al8Fe5 (ε) phase in the ternary system has a rhombohedral structure of the Al8Cr5-type (hR78-R-3m), rather than cubic Cu5Zn8-type structure (cI52-I-43m), like the binary one. A new binary compound Al45Mo7 was identified for the first time. Its crystal structure is established as monoclinic Al45V7-type (mS104-C2/m) with the lattice parameters a = 20.534, b = 7.561, c = 10.910 Å, β = 107.33. It was shown to form by peritectic reaction L + Al5Mo ⇄ Al45Mo7 at ∼800 °C. Iron additions stabilize the Al4Mo phase, which in the binary system is stable above 942 °C.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have