Abstract
Blending two gelators with different chemistries (12-hydroxystearic acid and a bis-urea derivative, Millithix MT-800) was used to impart shape stability to CrodaTherm 29, a bio-based phase change material (PCM), melting/crystallizing at near-ambient temperature. The gelators immobilized the PCM by forming an interpenetrating fibrillar network. 15 wt % concentration of the gelators was found to be effective in preventing liquid PCM leakage. In order to improve the mechanical properties and thermal conductivity (TC) of the PCM, gelation of suspensions of multiwalled carbon nanotubes (MWCNTs) and graphene nanoplatelets (GnPs) in a molten material was done at concentrations exceeding their percolation thresholds. Compared to pristine PCM, the gelled PCM containing 3.0 wt % of GnPs demonstrated a shorter crystallization time, ∼1.5-fold increase in strength, improved stability, and ∼65% increase in TC. At the same time, PCM filled with up to 0.6 wt % of MWCNTs had diminished strength and increased leakage with a slight TC improvement. Gelation of PCM did not significantly alter its thermal behavior, but it did change its crystalline morphology. The developed shape-stable PCMs may have a wide range of applications in ambient temperature solar-thermal installations, for example, temperature-controlled greenhouses, net zero-energy buildings, and water heaters.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have