Abstract

Abstract : Software GPS receiver development has been undertaken. We are particularly interested in improving the GPS signal-to-noise/interference ratio using beam forming techniques. The phase relationship among the antenna array elements requires careful calibration. In this study, we will report a phase calibration technique for a 2 by 2 GPS antenna array using both simulated and real GPS signals. This technique is based on the GPS signal-processing algorithm developed for the software GPS receiver. A four-channel digital data collecting system was used in the experiment. For a simulated GPS signal, the experiment was conducted in an anechoic chamber in which a GPS simulation system was facilitated. For real GPS signals, we conducted the experiment on a rooftop to receive the signal from GPS satellites. The calibration verified the coherent nature of the signals among the elements. The results also allowed the source's direction to be determined.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call