Abstract
The phase behaviour of amorphous and semicrystalline poly(butylene terephthalate) (PBT)/poly(ether imide) (PEI) blends has been investigated. PBT and PEI were miscible in the melt over the entire composition range. Upon the crystallization of PBT at temperatures lower than 210°C, a strong segregation of PEI was observed. The morphological observation by optical microscopy indicated that PBT crystallization was coupled with a liquid-liquid phase separation, and the modulated morphology created in the early stage of spinodal decomposition was preserved due to the rapid crystallization of PBT. The phase diagram for PBT/PEI blends was also determined. This binary pair exhibited a UCST phase diagram with the binodal line located below the equilibrium melting point. Investigation on the multiple melting behaviour showed that recrystallization of PBT after the initial melting was hindered by the presence of PEI. The results presented here have indicated that PBT/PEI exhibited quite similar phase behaviour to poly(ethylene terephthalate) (PET)/PEI blends.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
