Abstract
With the distributed generator to be attached to the distribution network, the current differential protection scheme may have some problems, resulting in maloperation or rejection of protection. This paper investigates the current distribution properties of an active distribution network with branches of undetected load and draws the conclusion that undetected load may cause differential protection maloperation. The differences in fault properties of differential protection in transmission network scenarios and distribution networks containing distributed generator are evaluated, leading to the conclusion that differential protection applied to active distribution networks may have reduced resistance to transition resistance and that poor signal synchronization conditions in distribution networks may lead to larger synchronization errors. A phase-angle adaptive current differential protection is proposed. It adaptively adjusts the phase angle constraint using the magnitude of the power frequency full current component proportion at both sides of the line. It can accommodate the protection needs of various operation modes of distribution networks containing distributed generator, and has the characteristics of strong resistance to transition resistance and strong phase shift braking ability. The correctness of the suggested protection scheme was verified using the PSCAD platform.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.