Abstract
The next generation of synthetic aperture radar (SAR) systems will need transmit and receive analog signals over a wide frequency range with large bandwidth to fulfil the increasing demands. Since the performance of the digital microwave component is deteriorated at increasing frequency, radio frequency (RF) front-end with the capability of frequency conversion is needed for frequency beyond a few gigahertz. However, for the widely employed RF mixers, the inherent imperfect of I-V characteristics of nonlinear devices, generates many undesired mixing spurs which restricts on the instantaneous bandwidth and the spurious-free dynamic range (SFDR). At Aerospace Information Research Institute Chinese Academy of Sciences, a photonic-assisted front-end with functions of signal generation and deramp processing has been conceived and implemented in an experimental deramp-on-receive CW SAR system. The system is called PFDIR (Photonic-Assisted Front-End Deramp-on-Receive Imaging Radar) and is envisaged to obtain SAR imaging at high resolution. In current stage, the Ku-band system with a bandwidth of 5.72 GHz, corresponding to a relative bandwidth of 37.8%, operates well with a fixed two-horn antenna. The configuration of the photonic front-end and the system design are described. Ground-based tests and airborne imaging results with geometrical resolution down to 5 cm are presented.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
