Petro-archaeometric characterization of potteries from a kiln in Adrano, Sicily

Erica Aquilia,Simona Raneri,Germana Barone,Gioconda Lamagna,Paolo Mazzoleni

doi:10.1186/s40494-015-0043-4

Erica Aquilia, Simona Raneri + Show 3 more

Open Access

https://doi.org/10.1186/s40494-015-0043-4

Copy DOI

Abstract

AbstractBackgroundThis work is part of a wide scientific project finalized to characterize the Sicilian pottery productions from Greek to Roman Age. In this prospective, local reference groups have been analysed in order to create a database of the circulation and production centres in Sicily during this period. In this framework, a set of 28 waste pottery fragments (III-II century B.C.) from a pit found during excavations at the fortification of Adrano (Sicily) have been studied.Characterization of the samples has been obtained by macroscopic, petrographic (OM), mineralogical (XRD) and chemical (XRF) analyses.ResultsMacroscopic analysis of the studied potteries has allowed to distinguish four groups on the basis of grain size, porosity and clay paste color. Petrographic and mineralogical analysis, carried out on a selection of representative samples have allowed us to obtain useful information on the production technology of the studied samples. Moreover, information about raw materials and provenance of clay sediments has been obtained by comparing chemical data of the analysed samples with locally outcropping clay sediments reference data. Finally, chemical results on Adrano potteries have been compared with kiln wastes from Siracusa and Gela.ConclusionsThe aim of the present work is to obtain fabric characterizations and technological information on a local reference group of ceramic specimens manufactured in Adrano (Sicily). Petrographic and mineralogical results allow us to esteem high firing temperature suggesting a good technological level of local production; in addition, chemical data suggest a local provenance of raw materials used in the production of the studied samples. The comparison with local production from Siracusa and Gela highlights several differences in the use of raw material and in the technological levels achieved in the different sites, over time. Therefore, this work provides a valuable contribution in defining the local scenario of ceramic production in South-Eastern Sicily during the Hellenistic Age and in producing local reference groups in the petro-archaeometric studies of archaeological potteries.

Highlights

IntroductionLocal reference groups have been analysed in order to create a database of the circulation and production centres in Sicily during this period
This work is part of a wide scientific project finalized to characterize the Sicilian pottery productions from Greek to Roman Age
The formation of reference groups represents an important procedure in archaeometric provenance studies of archaeological pottery

Summary

Introduction

Local reference groups have been analysed in order to create a database of the circulation and production centres in Sicily during this period In this framework, a set of 28 waste pottery fragments (III-II century B.C.) from a pit found during excavations at the fortification of Adrano (Sicily) have been studied. In the framework of the studies on circulation and production of ceramic artifacts in Sicily during Greek and Roman Age, several samples of kiln pottery fragments from a pit excavated at the fortification of Adrano (Sicily) [11,12] have been studied. In consideration of the importance of the city among the Sicilian potteries workshops, the petro-archaometric study of these artifacts has an important role in understanding the local manufacturing process in terms both technology and raw materials

Objectives

Methods

Results

Discussion

Conclusion