Abstract
The present study counted the frequency of detection technologies and monitoring frequency of pesticide species by frequency analysis based on the 28 258 pieces of data on pesticide content of Chinese medicinal materials in CNKI, calculated the detection rate and exceeding rate of different types of pesticides, and systematically analyzed the pesticide residue pollution of Chinese medicinal materials. The results showed that there were 40 types of pesticides with detection rates higher than 10%, where new pesticides such as organochlorines and nicotine accounted for 55%, and organic phosphorus, pyrethroids, and carbamates accounted for 17.5%, 15.0%, and 12.5%, respectively. Seventeen types of pesticides exceeded the standard to varying degrees, including 12 types(70.59%) with exceeding rates not higher than 5%, four types(23.53%) with exceeding rates in the range of 5%-10%, and one type(5.88%) with an exceeding rate higher than 10%. As revealed by the analysis results of the past five years, the pesticide residue pollution of Chinese medicinal materials showed a downward trend. Compared with the conditions at worst, organochlorines decreased by about 2/3 in detection rate and 47.23% in exceeding rate, carbamates by about 1/2 in detection rate and 10.78% in exceeding rate, organic phosphorus by 3/4 in detection rate and 7.22% in exceeding rate, pyrethroids by 1/2 in detection rate and 11.05% in exceeding rate, and other types by about 1/2 in detection rate but not exceeded the standard. In general, pesticide residues in Chinese medicinal materials and safety have been significantly improved. However, pesticide residues are still important factors affecting the quality and safety of Chinese medicinal materials. It is suggested to further improve the control standards of pesticide residues in Chinese medicinal materials, strengthen the monitoring of pesticides used in practical production, and promote the ecological planting mode to facilitate the high-quality development of the Chinese medicinal material industry.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have